Ardisam 5020D Provozní pokyny stáhnout pdf (Strana 15)

OPERATOR INSTRUCTIONS AND PARTS

CRT Models 6015V, 6015VCE, 6015BCE

Page 15

GetEarthquake.com

800-345-6007

BELT REPLACEMENT PART #’S:

31315 (forward belt)

CHANGE FORWARD/REVERSE BELT

1. Turn o engine. Engine must be cool.

2. Remove spark plug wire and secure from spark plug.

3. Remove belt guard. SEE FIGURE 6

  

- gently pull the engine recoil rope to rotate the pulley.

- with the pulley turning, force the forward belt out of the

V-groove.

- slide the belt free of the engine pulley.

- pull the forward belt down and out of the way.

   

- place forward belt in transmission pulley groove.

- gently pull the engine recoil rope to rotate the pulley while

forcing the forward belt into the V-groove.

4. Re-attach belt guard.

5. Attach spark plug wire.

DO NOT OPERATE TILLER BEFORE READING THE EN

GINE MANUAL PROVIDED IN THE PARTS PACKET.

CAUTION

TEMPERATURE OF MUFFLER AND NEAR BY AREAS MAY

EXCEED 150° F. AVOID THESE AREAS.

WARNING

IMPORTANT

ENGINE CAN OVERHEAT AND BECOME DAMAGED IF

DEBRIS BLOCKS THE COOLING SYSTEM OR ROTATING

SCREEN.

NEVER RUN ENGINE WITHOUT COMPLETE AIR

CLEANER INSTALLED ON ENGINE.

FIGURE 6

engine pulley

forward belt

transmission pulley

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 31 32

Žádné komentáře

Ardisam 5020D Provozní pokyny Strana 15